When manufacturers begin exploring automation, the same question often comes up early in the conversation:

What is the biggest risk in an automation project?

Most people assume the risk comes from the technology itself. They worry about robotics, programming complexity, or whether a new system will integrate with their existing production environment.

In reality, the biggest risk usually appears before a machine is ever designed.

The real risk is starting an automation project without fully understanding the manufacturing process being automated.

For companies in industries like medical device manufacturing, pharmaceutical automation, electronics manufacturing automation, and consumer products automation, the stakes are even higher. Production systems must not only run efficiently, but also maintain strict quality and compliance standards.

Successful custom industrial automation projects address these risks early. They combine engineering expertise with deep knowledge of the production process itself.

The most successful automation systems are not built by engineers alone. They are built through collaboration between engineering teams and the people who run the process every day.

Why Customer Involvement Is Critical

One of the most important factors in any automation project is the knowledge held by the people who already run the production process.

Operators, technicians, and manufacturing engineers often know more about a process than anyone else.

They understand the small details that rarely appear in prints or CAD models. These details can include:

  • Variations in how parts behave during handling
  • Small adjustments operators make during manual assembly
  • Common failure points or defect patterns
  • Environmental conditions that affect productionSomeone who has been building a part for years understands things that drawings cannot capture.

For example, a component may look straightforward on a print, but operators may know that certain batches tend to warp slightly, or that certain orientations feed more reliably than others.

These insights play a critical role when designing manufacturing automation solutions.

When automation engineers collaborate closely with the customer’s production team, those insights shape the machine design and reduce unexpected problems later in the project.

This collaboration becomes especially important in regulated industries such as:

In these environments, automation systems must support medical device compliance, pharmaceutical manufacturing standards, and GMP compliance automation.

Understanding the process thoroughly from the beginning helps ensure the system meets both production and regulatory requirements.

How Engineers Guarantee Performance on a Machine That Has Never Been Built

Custom automation projects frequently involve machines that have never existed before.

Unlike standardized equipment, these systems are built to address a specific manufacturing challenge.

That raises an important question for many manufacturers:

How can engineers guarantee performance on a machine that has never been built before?

The answer begins long before the machine is designed.

At Engineered Vision, engineers spend significant time early in the project gathering data and performing feasibility testing. This work is essential for risk mitigation in automation projects.

During this stage, engineers analyze the process in detail and evaluate any step that could introduce uncertainty or variability.

This early work helps answer questions like:

  • Can the parts be handled reliably with automated equipment?
  • Will inspection systems detect defects consistently?
  • Can the system meet the required production speed?
  • Are there process variables that could affect reliability?

Engineers often use prototyping and test equipment to validate these assumptions.

This may involve technologies such as:

Vision systems may also be evaluated for challenging applications such as translucent part identification, which is common in life sciences and medical device manufacturing.

By addressing potential challenges early, engineers reduce the likelihood of unexpected problems during machine build or production startup.

What Actually Happens During an Automation Project

Many people outside the automation industry are surprised by how structured these projects really are.

A typical custom automation system follows a defined process designed to keep both the engineering team and the customer aligned throughout the project.

1. Feasibility and Data Gathering

Engineers begin by collecting detailed process data and evaluating unknown variables.

This stage may involve testing parts, evaluating feeding strategies, or validating inspection methods.

2. Project Kickoff

Once the project begins, the sales team transitions the project to the engineering team.

A kickoff meeting with the customer confirms project goals, requirements, and technical questions.

3. Engineering and Design

Mechanical and controls engineers begin designing the system.

This stage combines several capabilities, including:

Throughout the design process, the engineering team conducts review meetings with the customer to confirm the system remains aligned with production requirements.

4. Fabrication and Assembly

Once the design is approved, fabrication begins.

Engineered Vision operates as a vertically integrated supplier, meaning many manufacturing steps happen in-house. This includes both  machine shop services and fabrication services.

Vertical integration improves communication between engineering and manufacturing teams and supports faster project execution.

5. Programming and Testing

Control engineers program the system and begin testing.

This stage often includes robot programming and motion validation using technologies such as:

Robots are integrated with vision systems and sensors to ensure accurate part positioning and inspection.

6. Factory Acceptance Testing (FAT)

Before the system ships, the customer visits the facility to observe the machine running their parts.

This stage confirms that the system meets the production requirements outlined during the project.

7. Installation and Validation

Once delivered, the machine is installed on the customer’s production floor. For regulated industries, this phase may involve IQ/OQ validation and additional validation protocols to support regulatory compliance.

Why Off-The-Shelf Automation Often Falls Short

Standard automation systems can work well for simple applications.

However, once production processes become more complex, these systems often struggle to address the full scope of the workflow.

Off-the-shelf equipment may handle one portion of the process but require additional manual handling or multiple machines to complete the operation.

Custom automation systems allow engineers to evaluate the entire manufacturing process and design a solution that integrates multiple steps into one system.

Instead of moving parts between multiple workstations, a custom machine can transform raw components into finished products in a single automated workflow.

This improves:

  • Manufacturing efficiency

  • Manufacturing productivity

  • Production optimization

  • Quality control automation

What Problems Automation Solves

Automation is not always about replacing people.  In many cases, automation allows manufacturers to achieve production speeds, precision, and repeatability that would otherwise be impossible.

Common challenges automation addresses include:

  • Labor shortage solutions
  • High production speed requirements
  • Ergonomic risks for operators
  • Quality consistency requirements
  • Automated inspection and defect detection

     

In some manufacturing environments, maintaining production volume manually would require dozens of operators working simultaneously.

Automation systems improve manufacturing productivity while reducing variability in the production process.  Many projects also deliver measurable automation ROI, with some systems achieving automation investment return in less than two years depending on production volume and labor costs.

Why Experience Matters in Custom Automation

Every custom automation project introduces new variables.

Experienced automation engineers anticipate potential problems before they occur.

 At Engineered Vision, the team leverages hundreds of years of combined engineering experience.  Our engineers apply proven design principles shaped by years of designing and building complex automation systems for real production environments. 

One common rule in machine design is:

Never rely on gravity to control a part. Always maintain control of it.

Experienced engineers also ensure that sensors and feedback systems confirm part position and machine status throughout the process.

These practices improve reliability and help ensure the system performs consistently once installed on the production floor.

This level of experience is one reason manufacturers choose a US-based manufacturing partner with deep expertise in custom automation.

Automation in Regulated Industries

Automation systems used in industries such as medical devices, pharmaceuticals, and life sciences must support strict quality and regulatory requirements.

Machines must support:

Automation systems often incorporate inspection technologies designed to measure critical dimensions and detect defects in real time.

These systems generate data that manufacturers use to maintain quality programs and demonstrate compliance during audits.

Engineered Vision has extensive experience building automation systems that support these requirements.

Thinking About Automation?

If you’re exploring automation for the first time, the most valuable first step is a conversation.

Discuss your manufacturing process with an experienced automation engineering team that understands both production challenges and regulatory requirements.

Engineered Vision provides engineering-led solutions designed and built in the United States, helping manufacturers improve efficiency while supporting US manufacturing competitiveness.

Talk with an automation engineer about your process challenges and explore how a custom automation system could improve your production.